Brother MFC-9160 Quick Setup Manual page 4

For Windows NT
Step 1.
Check that your computer is
turned on.
You must be logged on as the Administrator.
Step 2.
Connect the MFC to your PC
with the Parallel Cable.
A.
Connect the parallel interface cable to the parallel interface port of the MFC and
secure the wire clips.
B.
Connect the interface cable to the printer port of the computer and secure it with
the two screws. For the location of your computer's parallel printer port, see the
User's Guide for your computer.
For Apple
Step 1.
Make sure your MFC power
switch is turned OFF and your
Macintosh is turned ON.
Make sure you do NOT connect your MFC to your Macintosh.
Step 2.
Insert the CD-ROM into your CD-
ROM drive.
Installing MFC Software Suite
Select your language
Step 3.
Restart your Macintosh so it
can recognize the new driver.
You can get a variety of Install Software
information from this
You can install printer and scanner drivers and the various utility
CD-ROM
items.
Manuals
View the Owner's Manual and other documentation.
Brother Solutions Centre
Connect to the Brother Solutions Centre, the Service and Support
Web Site for your Brother Product.
Further information
(For Windows ® ) Interactive Demonstration showing features of the Printer Driver.
®
Workstation Version 4.0 Users
®
Macintosh
1.
When the window appears, double-
click MFC Software Suite Installer.
2.
Click your language to install the
printer and scanner drivers. After the
installation is completed, the screen
prompts you to restart your Macintosh.
What is included on the CD-ROM
®
Windows
Step 3.
Step 4.
(Same step as Windows 95/98/98SE/Me/2000 Users
®
®
QuickDraw Driver for OS 8.6/9.0/9.0.4/9.1 Users
Step 4.
Step 5.
Step 6.
You can get a variety of
information from this
CD-ROM
(For Macintosh ® )
– 4 –
Turn the MFC power switch ON.
Follow the instructions on the
screen.
12.
Select Yes to restart your computer, and
then click Finish.
13.
Click Yes to have the Control Centre
loaded each time Windows is started.
The Control Centre will appear as an
icon in the task bar. If you click No, the
Scan keys on the MFC will be
disabled. Please see Note*3.
Printer and Scanner drivers have been installed and the
installation is now complete.
Connect the Filter Core and
Cable Tie to the USB cable.
Connect the MFC to your
Macintosh with the USB cable,
and then turn the MFC power
switch ON.
Select the Printer.
1.
From the Apple menu, open the
Chooser.
2.
Click to highlight the printer driver icon
you installed. On the right side of the
Chooser, select the printer to which
you want to print. Close the Chooser.
Printer and Scanner drivers have been installed and the
installation is now complete.
®
Macintosh
MFC Software Suite Installer
You can install the printer and scanner drivers and the various
utility items.
ReadMe!
You can get important information and troubleshooting tips.
Documents
View the Owner's Manual and other documentation.
1-11
Step 3. , )
Version A