Download Print this page
Brother MFC-9160 Quick Setup Manual

Brother MFC-9160 Quick Setup Manual

Brother mfc-9160: quick start
Hide thumbs Also See for MFC-9160:

Advertisement

Quick Setup Guide

MFC-9160

THANK YOU!

... FOR PURCHASING YOUR BROTHER MACHINE.
WE ARE SURE YOU WILL BE IMPRESSED WITH THE
CONVENIENT WAY THAT YOUR NEW MACHINE PERFORMS SO
MANY TASKS WITH GREAT RESULTS!
Follow these simple instructions in numerical order.
For greater detail, consult your Owner's Manual and CD-ROM.
Alternatively, if you cannot solve a problem:
Refer to Frequently Asked Questions (FAQ's) on Brother Solutions
Web Site:
URL: http://solutions.brother.com
Call Brother Customer Service at: 0161 931 2354
2
Install the Drum Unit
A.
Unpack the drum unit assembly, and gently
rock it from side to side five or six times to
distribute the toner evenly inside the
cartridge.
To prevent damage to the drum, do not
expose it to light for longer than a few
minutes.
Do NOT remove the clear plastic starter
sheet this will be ejected while the machine
is warming up.
Starter Sheet
Do NOT remove
the Starter Sheet!
4

Load Paper

A.
Adjust the guides to the position for the paper
size you are using.
B.
Fan the paper well.
C.
Push down the paper lever. Load the paper
(with the lever down). Make sure the print
side is toward the fax machine and the paper
level is stacked below the paper mark. The
feeder can hold up to 200 sheets of paper, or
up to 10 envelopes.
1

Packing List

IEEE-1284 Compliant
Bi-directioned Cable
Cable Tie
For USB Cable
Mains Power Cord
Drum Unit Assembly
Keep the packing materials for possible future transport. If you do not pack the machine properly, it may
void your warranty.
B.
Open the top cover of the machine by pulling
the lever toward you and lifting the cover.
C.
Holding the drum unit by its handles, insert it
into the machine.
D.
Close the top cover.
Press and slide
Load the paper
with the lever down
– 1 –
3
Attach the Plastic Support
and Pull out the Paper Tray
A.
Attach the paper support to
the multi-purpose sheet
feeder.
B.
Pull out the paper tray and
the extension.
C.
If your paper size is A4 or
Letter, extend the paper
stopper by pulling it toward
you.
5
Install Mains Power Cord
(Example for
the U.K.)
Mains Power Cord
Turn the power switch ON.
Complete reading this guide before connecting the Parallel or USB
cables.
Paper Support
CD-ROM
Owner's Manual
Brother Quick
Setup Guide
(For A4 and Letter paper)
Version A

Advertisement

loading

Summary of Contents for Brother MFC-9160

  • Page 1: Quick Setup Guide

    Follow these simple instructions in numerical order. For greater detail, consult your Owner’s Manual and CD-ROM. Alternatively, if you cannot solve a problem: Refer to Frequently Asked Questions (FAQ’s) on Brother Solutions Web Site: URL: http://solutions.brother.com Call Brother Customer Service at: 0161 931 2354...
  • Page 2: Setting Up The Mfc And Pc To Work Together

    Before You begin • You must set up the hardware and install the Brother Drivers before you can use your MFC as a printer and scanner in any Windows • Please purchase the appropriate cable if you intend to use USB.
  • Page 3 User’s Guide for your computer. Step 5. Turn the MFC power switch ON. Step 6. The installation of the Brother driver will automatically start. Follow the instructions on the screen. ® ( For Windows...
  • Page 4 CD-ROM items. Manuals View the Owner’s Manual and other documentation. Brother Solutions Centre Connect to the Brother Solutions Centre, the Service and Support Web Site for your Brother Product. Further information (For Windows ® Interactive Demonstration showing features of the Printer Driver.