Setting Up Your Pc - Brother MFC-9070 Setting-Up Manual

Setting Up and Using PC-FAX Receiving
(For the MFC-9660 and MFC-9880)
Before you can start receiving faxes, please install the appropriate Windows XP driver (Windows XP In-box driver or Brother Windows XP driver). After the driver is installed, refer to the
following information to configure your Windows XP PC for Fax receiving.
Step 10.

Setting Up Your PC

1.
To activate Faxing receiving, click Set
up faxing in the Printer Tasks menu.
5.
The Fax Configuration Wizard
starts. Click Next.
9.
Enter the Called Subscriber
Identification (CSID), and then click
Next.
Note: When PC-FAX Receiving is active, you cannot run the Remote Setup utility. To use Remote Setup, check
off Enable Receive in item 7 of Step 10.
For information on how to use PC-FAX Sending and Receiving, please refer to Help in the Fax Console.
2.
The FAX services will be installed on
your PC.
6.
Enter the sender information, and
then click Next.
10.
Select if you print a received fax or
save it in a folder, and then click
Next.
3.
A Fax icon will then appear in the
Printers and Faxes folder. If Fax
icon does not appear, click Install a
local fax printer in the Printer tasks
menu.
7.
Select fax device you use in the
Please select the fax device
pull-down list. Click to select the
Enable Receive check box. Specify
the number of rings before your MFC
will attempt to answer the fax. Click
Next.
11.
Click Finish.
The PC-FAX installation is now
complete.
4
4.
Select the Start, All Programs,
Accessories, Communications,
Fax, Fax Console.
Note: If you have not configured your
fax connection, the screen for your
local information will be displayed.
Enter your details, ensuring you
specify the outside line access
number if necessary and click OK.
Select the My location radio button if
it is not selected and then click OK.
8.
Enter the Transmitting Subscriber
Identification (TSID), and then click
Next.