For Windows; 98/98Se/Me Users Only - Brother MFC-8640D Quick Setup Manual

Step 2
For USB Interface Cable Users

(For Windows

For Windows
Make sure that you followed the instructions in
9
When the screen appears, connect the USB
interface cable to your PC, and then
connect it to the MFC.
0
Plug in the power cord and turn on the MFC.
It will take a few seconds for the installation
screens to appear.
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another, please wait for a
while.
16
Installing the Driver & Software
®
98/98SE/Me/2000 Professional/XP)
®

98/98SE/Me Users Only

1 8
to on pages 14 - 15.
A
When the Brother on-line Registration
screen is displayed, make your selection
and follow the on-screen instructions.
B
When the following screen appears, click
Finish and wait as the PC restarts Windows
and continues the installation.
If the installation is unsuccessful, try
installing again using Repair MFL-Pro Suite
option from the main menu. Select Repair
MFL-Pro Suite and follow the instructions
on the screen.
The MFL-Pro Suite, PC-FAX, Printer
driver and Scanner driver have been
installed and the installation is now
complete.