Load Paper In The Paper Tray - Brother MFC-7220 Quick Setup Manual

Step 1
Load Paper in the Paper
4
Tray
1
Pull the paper tray completely out of the
machine.
2
While pressing the paper guide release
lever, slide the adjusters to fit the paper
size. Check that the guides are firmly in the
slots.
For Legal size paper, press in the inside
latches and pull out the back of the paper
tray.
6
Setting Up the Machine
3
Fan the stack of paper well to avoid paper
jams and misfeeds.
4
Put paper in the paper tray.
Check that the paper is flat in the tray and
below the maximum paper mark.
5
Put the paper tray firmly back into the
machine and unfold the output paper tray
support flap before you use the machine.
Output paper tray
support flap
For details on supported paper
specifications, see "About paper" in Chapter
1 of the User's Guide.
Maximum
paper mark