Brother MFC-3200C Quick Setup Manual page 21

C
When this screen appears, turn on the MFC
by plugging in the power cord.
Connect the Filter core and Cable tie to USB
cable.
Connect the USB interface cable to your
PC, and then connect it to the MFC.
.
It will take a few seconds for the installation
screen to appear.
The installation of the Brother driver will
automatically start. Follow the instructions
on the screen.
D
When the above screen appears, click Next
to start the PC-FAX send and Remote
Setup Installation Program.
E
Select the folder where Setup will install the
program files. If you do not wish to use the
default directory, click the Browse button to
select a new folder and then click Next to
continue.
F
Select the program folder in which you wish
to add the program icons, and then click
Next.
G
If this screen appears, select the
components to install (the default gives you
the most functionality), and then click Next.
To be continued
19