Samsung RT53 Service Manual page 28

1 0
304 views
 
Total Ver.02
Uploaded by epalarcon9
Full description
ninguno
   
Save Embed Share Print
DISASSEMBLY & REASSEMBLY
3-6. Check the door level and adjust
NO
Put the unit on its
1
installation place
2 Check the floor even
3 Insert leveling JIG
4 Adj u st the front legs
5 Remove the leveling JIG
6 Level the doors
Hotpoint,Mba
4033 Cv
PRECEDURES
- under the roof, they should use rug or mat to
prevent the floor damage.
※ the installer should select a proper location.
- If the back of the ref is not leveled, there
will be diagonal defect. So, make sure to put a
hard insertion (ex: wooden block, plastic bar) on
the lower floor, fix it with sticky tapes and
level it.
- to let the both rear caster touch the floor,
lift up a little the unit and insert the JIG
- using a flat driver, let the legs touch the floor
- settle the unit entirely, pull out the JIG
- turn the adjusting screws clockwise or count
clockwise, make the door level even
※ make sure that the lock nut on adjusting screw
entirely fixed.
RELATED TITLES
LG_MULTI_F_3828A20097W_1[1]
HOW TO DO

Samsung 34648123
Refrigerador WD856UH
PICTURES