Using The Brother Automatic Installer Application In The Cd-Rom To Configure Your Machine For A Wireless Network; Changing The Print Server Settings; Using The Bradmin Professional Utility To Change The Print Server Settings (For Windows ® Only) - Brother DCP-340CW Network User's Manual

Configuring your machine for a wireless network
5
to select Setup WLAN.
Press ▲ or ▼
Press OK.
6
to select SecureEasySetup.
Press ▲ or ▼
Press OK.
7
The wireless network connection status will be displayed and will show either; Connecting WLAN,
Connected or Connection Error.
Connecting WLAN is displayed when the print server is trying to make a connection to your router or
access point.
Connected is displayed when the print server is successfully connected to your router or access point.
You can now use your machine in a wireless network.
Connection Error is displayed when the print server has not connected to your router or access
point. Restart from Step 1.
If the same message is displayed again, reset the print server back to the default factory settings (Page
4-28) and try again.
Using the Brother automatic installer application in the CD-ROM to configure
your machine for a wireless network
See Chapter 8 (for Windows) and Chapter 9 (for Macintosh) for information on how to use the Brother
automatic installer application in the CD-ROM we have provided with the machine.

Changing the print server settings

Once you have configured your machine for a wireless network, you can change the wireless settings using
the BRAdmin Professional utility, the Remote Setup software or the control panel on the front of the Brother
machine.
Using the BRAdmin Professional utility to change the print server settings (for
®
Windows only)
Note
• Please use the BRAdmin Professional utility version that was supplied on the CD-ROM with your
Brother product. You can also download the latest Brother BRAdmin Professional utility version from
http://solutions.brother.com . This utility is only available for Windows
®
users.
3
3 - 13