Rfid Reader/Writer - Omron NJ Series Network Connection Manual

8.2. RFID Reader/Writer

Use the following procedure to initialize the settings of the RFID Reader/Writer.
1 Press the mode switch at least
one second and start the Safe
Mode of the RFID
Reader/Writer.
2
Type "http://192.168.1.200/" in
the address bar (
Internet Explorer.
The Safe Mode Window is
displayed. Click the Init All
Settings Button.
The RFID Reader/Writer will be
initialized and restarted.
*The firmware version in the
safe mode is 010-000-000-0.
Additional Information
For the initialization of the RFID Reader/Writer, refer to Mode switch in Names and Functions
of Components in Reader of Section 2 Specifications and Performance and Mode in Section
3 Mode and Function in the V750-series UHF RFID System User's Manual (Cat. No. Z235).
) of the
8. Initialization Method
(Side of the RFID Reader/Writer)
29