Setting Up The Rfid System - Omron V680S Connection Manual

5.3.

Setting up the RFID System

Set up the RFID System.
5.3.1. Parameter Setting
Set the parameters of the RFID System.
Additional Information
For details on the RFID System setup and operation refer to the RFID V680S Series User's
Manual (Cat. No. Z353).
1
Connect the RFID System over
Ethernet to the controls system
and PC.
To configure the RFID System,
use a web browser, and then
enter the IP address of the RFID
System.
(In this example, the default IP
address is used).
Any changes to the RFID
System can be made using the
web browser. For detailed
configuration, please refer to
RFID System User Manual.
9