Brother DCP-330C Quick Setup Manual page 24

STEP2
Installing the Driver & Software
6
Turn on your Macintosh
7
Put the supplied CD-ROM into your CD-ROM
drive.
8
Double-click the Start Here OSX icon to install.
Follow the on-screen instructions.
Note
Please wait, it will take a few seconds for the
software to install. After the installation, click
Restart to finish inatalling the software.
9
The Brother software will search for the Brother
device. During this time the following screen
will appear.
10
When this screen appears, click OK.
For Mac OS
The MFL-Pro Suite, Brother printer driver,
scanner driver and Brother
ControlCenter2 have been installed and
the installation is now complete.
Go to step 15.
11
For Mac OS
Click Add.
22
®
.
®
X 10.3.x or greater users:
®
X 10.2.4 to 10.2.8 users:
12
Choose USB.
13
Choose DCP-XXXX (where XXXX is your
model name), and then click Add.
14
Click Print Center, then Quit Print Center.
The MFL-Pro Suite, Brother printer driver,
scanner driver and Brother
ControlCenter2 have been installed and
the installation is now complete.
®
Macintosh