Scan To Image - Brother DCP-110C Software User's Manual

Scan to Image

When you select Scan to Image your document will be scanned and
sent directly to the PC you designated on your network. The
ControlCenter2.0 will activate the default graphics application on the
designated PC. You can change the Scan configuration. (See Image
(example: Microsoft Paint) on page 3-6.)
For Network Scanning the ControlCenter2.0 selections are used
only for configuring the Scan button. You will not be able to
initiate a network scan from the ControlCenter2.0.
1
Load your document.
2
Press
3
Press or
▲
Scan to Image .
Menu/Set
Press
4
Press or
▲
Menu/Set
Press
If the LCD prompts you to enter a Pin number, enter the 4-digit
Pin number for the destination PC on the control panel.
Mono Start
Press
The machine will start the scanning process.
7 - 6 NETWORK SCANNING
Scan
( ).
to select
▼
.
to select the destination PC you want to send to.
▼
.
Colour Start
or
Scan to Image
.