For Network Users; Installing The Bradmin Professional Configuration Utility (Windows ® Only); Setting Your Ip Address, Subnet Mask And Gateway Using Bradmin Professional (Windows ® Only) - Brother DCP-115C Quick Start Manual

For Network Users

This section is for an administrator who wants to configure the machine on a network using the BRAdmin
1
Professional utility. (DCP-315CN only)
Installing the BRAdmin
Professional configuration
utility (Windows
The BRAdmin Professional utility is designed to
manage your Brother network connected devices
such as network-ready Multifunction devices and/or
network-ready printers in a Local Area Network (LAN)
environment.
BRAdmin Professional can also be used to manage
devices from other manufacturers whose products
support SNMP (Simple Network Management
Protocol).
For more information on BRAdmin Professional, visit
us at http://solutions.brother.com.
1
Put the supplied CD-ROM into your CD-ROM
drive. The opening screen will appear
automatically. Follow the on-screen
instructions.
2
Click Install Optional Applications on the
main menu screen.
3
Click BRAdmin Professional and follow the
on-screen instructions.
28
®
only)
Setting your IP address,
Subnet Mask and Gateway
using BRAdmin Professional
®
(Windows
1
Start BRAdmin Professional, and choose TCP/IP.
2
Click Devices, then Search Active Devices.
BRAdmin searches for new devices automatically.
3
Double-click the new device.
4
Enter the IP Address, Subnet Mask and
Gateway, and then click OK.
5
The address information will be saved to the
machine.
Note
You can use the BRAdmin Professional utility to
set a password. (See the Network User's Guide on
the CD-ROM.)
only)