Connecting An External Or Extension Telephone - Brother FAX-8360P Owner's Manual

Outgoing Message (OGM) of External TAD
Timing is important in recording this message. The message sets up the ways to handle both manual
and automatic fax reception.
1
We recommend the outgoing message (OGM) is no longer than 20 seconds.
2
Allow 5 seconds of silence at the beginning of your message.
(This allows the fax to detect the calling tone prior to OGM, so reception can be faster.)
3
We recommend that you end your OGM by giving your Remote Activation Code for people
sending manual faxes. For example:
"After the beep, leave a message or send a fax manually by pressing
Please note that some faxes that are sent manually cannot be received automatically because some
fax machines do not send a fax tone if the call is manually dialled. In these cases you must inform
callers that they must enter the remote activation code to send a fax.

Connecting an External or Extension Telephone

You can connect a separate telephone to the machine, as shown below.
(Example
for the U.K.)
Whenever this external phone (or TAD) is in use, the screen displays TELEPHONE.
51 and Start"
External
Telephone
Preparation and Simple Use Guide
Extension
Telephone
7