Setting The Beeper Volume; Setting The Speaker Volume; Setting The Ring Volume - Brother FAX-817 Series User Manual

Setting the Beeper Volume

You can change the beeper volume. The default (factory) setting is
LOW. When the beeper is on, the fax machine will beep when you
press a key, make a mistake or after you send or receive a fax.
1
Press Menu/Set, 1, 4.
(LOW, HIGH or OFF)
2
Press ▲ or ▼ to select your option.
Press Menu/Set.
3
Press Stop/Exit.

Setting the Speaker Volume

You can adjust the speaker volume.
1
For FAX-817/827, lift the handset and press Hook.
For FAX- 837MC, press Speaker Phone.
2
Press
The LCD shows the setting you are choosing. Each key press
changes the volume to the next setting. The new setting will
remain until you change it again.
3
For FAX-817/827, press Hook.
For FAX- 837MC, press Speaker Phone.
(FAX-837MC only)
■
You can adjust the speaker volume using
while you are listening to your OGM (Outgoing Message)
and ICMs (Incoming Messages).
■
If you turn Incoming Recording Monitor to OFF (Menu/Set,
8, 6) the Speaker for screening calls will be disabled and
you won't hear callers leaving messages. The volume for
other operations can still be controlled using

Setting the Ring Volume

You can turn the ring off or you can select a ring volume level when
your machine is idle (not being used).
Press or
press these keys, the fax machine will ring so you can hear the
active setting as the LCD shows it. The volume changes with each
key press. The new setting will stay until you change it again.
4 - 4
Initial Setup
or to adjust the volume level.
to adjust the volume level. Every time you
4.BEEPER
or
or .