Stealth Cam STC-I540IR User Manual page 34

All manuals and user guides at all-guides.com
video IN jack on the TV. Make sure to switch to VIDEO IN mode
on your TV. (See your TV owner's manual for directions)
Turn on the TV monitor and slide the camera power switch to TEST.
Your camera is preset to NTSC TV out system by default.
•
Press the OK button on the camera. This will display the last
•
image captured.
Using the LEFT/RIGHT buttons to select the image you wish to
•
view. Image number and total number of images in memory
will display on the center bottom of the screen.
Once you have selected the image you wish to view, press the
•
UP button. This will magnify the image on the screen.
Using LEFT/RIGHT/UP/DOWN buttons, you can move the
•
image to display different areas of the image.
To return to the image selection view from the magnified image
•
screen, press the OK button.
www.stealthcam.net
STC-I540IR
Toll Free 877-269-8490
34