Parkside PAS D5 Operation And Safety Notes Translation Of The Original Instructions page 19

Screw driving
Vibration emission value a
Uncertainty K:
NOTE
u
The declared vibration total value and the declared noise
emission value have been measured in accordance with a
standard test method and may be used for comparing one
tool with another .
u
The declared total vibration value and the declared noise
emission value may also be used for a preliminary assessment
of exposure .
m
WARNING!
u
The vibration and noise emissions during actual use of the
power tool can differ from the declared values depending on
the manner in which the tool is used, especially what kind of
workpiece is processed .
Try to minimise exposure to vibration and noise . Examples of
measures to reduce vibration include wearing gloves when
using the tool and limiting working time . All parts of the
operating cycle must be taken into account (e .g . times when
the power tool is switched off and when it is running idle in
addition to the trigger time) .
: = < 2 .5 m/s
h
= 1 .5 m/s
(0 .912 m/s
2 2
2
GB
)
15