Siemens SIMATIC S7-1500 Manual page 10

Product overview
2.1 Properties
Properties
The digital module has the following technical properties:
● 16 digital outputs, electrically isolated in groups of 8
● Rated output voltage 24 VDC
● Rated output current 0.5 A per channel
● Suitable for solenoid valves, DC contactors, and indicator lights
The module supports the following functions:
Table 2- 1 Version dependencies of the module functions
Function
Firmware update
Identification data I&M0 to I&M3
Module-internal Shared Output (MSO)
Configurable submodules / submodules
for Shared Device
You can configure the module with STEP 7 (TIA Portal) and with a GSD file.
Accessories
The following accessories are supplied with the module and can also be ordered separately
as spare parts:
● Front connector (push-in terminals) including cable tie
● Labeling strips
● U connector
● Universal front door
You can find more information on accessories in the S7-1500 Automation System
(http://support.automation.siemens.com/WW/view/en/59191792) system manual and the ET
200MP Distributed I/O System
(http://support.automation.siemens.com/WW/view/en/59193214) system manual.
10
Firmware version of
the module
V1.0.0 or higher
V1.0.0 or higher
V1.0.0 or higher V13 Update 3 or higher
(PROFINET IO only)
V1.0.0 or higher V13 Update 3 or higher
(PROFINET IO only)
Digital output module DQ 16x24VDC/0.5A BA (6ES7522-1BH10-0AA0)
Configuration software
STEP 7
(TIA Portal) (TIA Portal) V12 or higher, or
STEP 7 V5.5 SP3 or higher
V13 or higher
V13 or higher
Manual, 09/2014, A5E32364017-AB
GSD file in STEP 7
X
X
X
(PROFINET IO only)
X
(PROFINET IO only)