Fax Resolution; Manual And Automatic Fax Redial - Brother FAX 1920CN User Manual

Fax Resolution

You can use the
temporarily (for this fax only). Press
to select the setting you want, and then press
—OR—
You can change the default setting.
1
If it is not illuminated in green, press
2
Load your original. (See Load originals on page 2-1.)
3
Menu/Set
Press
4
Press
resolution you want.
Menu/Set
Press
5
Stop/Exit
Press
Standard
Fine
S. Fine
Photo

Manual and automatic fax Redial

If you are sending a fax manually and the line is busy, press
Redial/Pause
again. If you want to make a second call to the last number dialed,
you can save time by pressing
Color Start
.
Redial/Pause
If you are sending a fax automatically and the line is busy, the
machine will automatically redial one time after five minutes.
6 - 8 SETUP SEND
Fax Resolution
2 2 2
, , , .
or to select the
.
.
Suitable for most typed originals.
Good for small print and transmits a little
slower than Standard resolution.
Good for small print or artwork and transmits
slower than Fine resolution.
Use when the original has varying shades of
gray. This has the slowest transmission
time.
, and then press
only works if you dialed from the control panel.
key to change the setting
Fax Resolution
Black Start
or
Redial/Pause
and
Menu/Set
.
Fax
( ).
2.Fax Resolution
Color Start
to try
Black Start
and
or
or