Table of Contents
Advertisement
Installing the RocketRAID 3622/3620
Note: Make sure the system is powered-off before installing the host
adapter.
1. Open the system chassis and locate an unused PCI-E 2.0 x8/x16
slot or PCI-E 3.0 x8/x16 slot.
2. Remove the PCI-E slot cover.
3. Gently insert the RocketRAID 3622/3620 into the PCI-E slot, and
secure the bracket to the system chassis.
4. After installing the adapter, attach the hard disks or backplane
enclosure to the host adapter using the mini-SAS cables.
5. Close and secure the system chassis.
Using the RocketRAID 3622/3620
Driver and Software Installation (Windows)
1. After installing the RocketRAID 3600 series host adapter, boot to
the Windows operating system.
2. Windows should automatically detect the card, and display the
"Found New Hardware Wizard".
3. Insert the HighPoint software CD into the system's optical drive.
4. Windows will display the CD auto-run window. Run the CD by
clicking "Run Setup.exe".
5. The HighPoint software install program interface will be displayed.
Click the "Install Driver" button to install the Device Driver for
RocketRAID 3600 Series HBA.
5
Advertisement
Table of Contents
