Information - BAFANG E-SYSTEM Manual

2.7.2 "Information"

After the HMI powered on, press and hold
and to enter into the setting function.
Briefly press (<0.5S)
mation" and then briefly press
confirm.
Note: All information here cannot be changed, it is
to be viewed only.
2.7.2.1 "Wheel Size"
Briefly press or
and then briefly press
size default.
Press the button (<0.5S) to exit back to
the "Information" interface.
2.7.2.2 "Speed Limit"
Briefly press or
Limit", and then briefly press
speed limit default.
Press the button (<0.5S) to exit back to
the "Information" interface.
or to select "Infor-
(<0.5S) to
to select " Wheel Size",
to view the wheel
to select " Speed
to view the
2.7.2.3 "Battery Info"
Briefly press
and briefly press
press or
→ b04 → b06 → b07 → b08 → b09 → b10 →
b11 → b12 → b13 → d00 → d01 → d02 → ...
→ dn → Hardware Ver → Software Ver).
Press the
the "Information" interface.
Notice: If the battery doesn't have commu-
nication function, you won't see any data
from battery.
View the battery information
View the hardware and software version of battery
Code
b01
b04
b06
b07
b08
b09
b10
30
or to select "Battery Info",
to enter, then briefly
to view the battery data (b01
button (<0.5S) to exit back to
Code Definition
Current temperature
Battery voltage
Current
Remaining battery
capacity
Battery capacity of
Full charged
Relative SOC
Absolute SOC
Unit
℃
mV
mA
mAh
mAh
%
%