Settings; Display Setting - BAFANG E-SYSTEM Manual

2.7 SETTINGS

After the HMI powered on, press and hold
and button (at the same time) to enter into
the setting interface. Briefl y press (<0.5S)
button to select "Setting","Information" or
"Exit" , then briefl y press (<0.5S)
confi rm.
You can press and hold
at any time, to return to the main screen.
2.7.1 "Setting" interface
After the HMI powered on, press and hold
and button to enter into the setting
interface. Briefl y press (<0.5S)
select "Setting" and then briefl y press
(<0.5S) to confi rm.
2.7.1.1 "Unit" Selections in km/Miles
Briefl y press or
briefl y press to enter into the item. Then
choose between "Metric" (kilometer) or
"Imperial" (Miles) with the
Once you have chosen your desired selec-
tion, press the
and exit back to the "Setting" interface.
button to
and button
or to
to select "Unit", and
or button.
button (<0.5S) to save
2.7.1.2 "Auto Off" Set automatic Off time
Briefl y press
and briefl y press
or
Then select the automatic Off time as "OFF
"/"9"/"8"/"7"/"6"/"5"/"4"/"3"/"2"/"1" with
the or
your desired selection, press the
(<0.5S) to save and exit back to the "Setting"
interface.
Notice: "OFF" means this function is off, the
unit is minute.
2.7.1.3 "Brightness" Display brightness
Briefl y press
and briefl y press
Then select the percentage as "100%" /
"75%" / "50%" / "30%" / "10%" with the
or
your desired selection, press the
(<0.5S) to save and exit back to the "Setting"
interface.
Notice: "10%" is the weakest brightness and
100%" is the strongest brightness.
2.7.1.4 "Power View" Set output display
mode
Briefl y press
and briefl y press
Then select the output display mode as
"Power"/"Current" with the
28
or to select "Auto Off",
to enter into the item.
button. Once you have chosen
or to select "Brightness",
to enter into the item.
button. Once you have chosen
or to select "Power View",
to enter into the item.
button
button
or button.