Using The Remote Control; How To Use The Remote Control - Samsung HW-LST70T Full Manual

Hide thumbs Also See for HW-LST70T:
Table of Contents

Advertisement

Available languages

Available languages

03 USING THE REMOTE CONTROL

How to Use the Remote Control









Power



D.IN



Source


Mute



Sound
Control
ENG - 12
Turns the Soundbar on and off.
• Auto Power Down Function
The unit turns off automatically in the following
situations:
– In D.IN / Wi-Fi / BT mode if there is no audio
signal for 18 minutes.
Press to enter the "D.IN" mode.
Press to select a source connected to the Soundbar.
Press the
(Mute) button to mute the sound.
Press it again to unmute the sound.
When pressed, the setting items such as TREBLE, or
SYNC are displayed in sequence. The desired item
can be adjusted using the Up/Down buttons.
– To adjust the TREBLE volume, select Sound
Control → TREBLE, and then use the Up/Down
buttons to adjust the volume within a -6 to +6
range.
– Press and hold the
for about 5 seconds to adjust the sound for each
frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz,
2.5kHz, 5kHz, and 10kHz are selectable using
the Left/Right buttons and each can be
adjusted to a setting between -6 to +6 using
the Up/Down buttons. (Make sure the Sound
mode is set to "STANDARD".)
– If the video on the TV and audio from the
Soundbar are not synchronized, select SYNC in
Sound Control, and then set the audio delay
between 0~300 milliseconds by using the Up/
Down buttons.
– SYNC is only supported for some functions.
(Sound Control) button

Advertisement

Table of Contents
loading

Table of Contents