Using The Scan Key; Scan To E-Mail (Pc) - Brother MFC-8460N Software User's Manual

Using the Scan key

If you want to scan a document using the duplex scanning feature, you need to put the document in the ADF
and then choose 2sided (L) edge or 2sided (S) edge depending on your document layout.
Choose your document layout from following table:
Portrait
Front
Front
Note
• Duplex scan is supported by the MFC-8670DN, MFC-8860DN, MFC-8870DW and DCP-8065DN only.
• Duplex scan is available from the ADF only.
• Duplex scan is not available for legal size paper.

Scan to E-mail (PC)

When you choose Scan to E-mail (Macintosh
®
Macintosh you designated on your network. ControlCenter2 will activate the default E-mail application on
the designated Macintosh
and it will be sent with the E-mail from the Macintosh
You can change the scan configuration. (See E-mail on page 162.)
a
Put the document face up in the ADF, or face down on the scanner glass.
b
Press (Scan).
c
Press a or b to choose Scan to E-mail.
Press OK.
If your machine is a MFC-8460N or MFC-8660DN, go to Step f.
If your machine is a MFC-8670DN, MFC-8860DN, MFC-8870DW or DCP-8065DN, go to Step d.
Back Front
Back Front
Document Layout Table
®
), your document will be scanned and sent directly to the
®
for addressing to the recipient. You can scan a black and white or color document
11. Network Scanning (Not available for DCP-8060)
Landscape
Back
Back
®
as an attachment.
11
LCD Message
(L)edge
(Long edge)
(S)edge
(Short edge)
11
175