Data Disc Play Operation; Usb Playback - Boss Audio Systems BV7200 User Manual

Data Disc Play Operation

When you insert a data disc including audio
(MP3), movie (MPEG4) or picture (JPEG)
fi les into the disc slot, the following main
menu will appear:
Press the TITLE to change the source.
Press the DISP to switch to the following
interface.
Use the cursor buttons ( / / / ) and the
ENTER button to select item.
Press the TITLE to switch between AUDIO,
JPG and MOVIE playback modes.
Playback type icons:
AUDIO Playback mode (default)
JPG Playback mode
MOVIE Playback mode
In JPG playback mode or MOVIE playback
mode, press the
main menu.
(STOP) to return to the

USB Playback

This disc player features a front panel USB
interface (6). A USB device can be con-
nected to this port.
When you insert a USB device into the
USB connector, the DVD player will read
the USB automatically.
The unit gives priority to a disc or SD/MMC
card. If you insert a disc into the disc slot or
insert a SD/MMC card into the SD/MMC in-
terface while playing from the USB device,
the unit will play the disc or the SD/MMC.
Press the button to enter PRE-STOP
mode, then press the GOTO button to
switch to the USB playback mode.
Note:
When reading the USB device, please don't
unplug it. If the player is unable to read the
device, check if the device is in good condi-
tion. You may also try removing the device
fully from the port, and reinserting it again.
- The main unit can only support the stan-
dard USB-memory format approved by
Microsoft.
- USB MP3 player is not a "standard," which
means different brands or models have
their own standards. Therefore, this unit
may not support every MP3 player.
- When connecting an MP3 player which
has a normal non-rechargeable battery in
the player, you should remove the battery
from the MP3 player before you connect it
to the USB port. Otherwise, the battery may
explode.
BV7200 User's Manual - page 19