Table of Contents
Advertisement
Troubleshooting
If you experience operation or performance problems with this product, compare your
installation with the electrical wiring diagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
SYMPTOM
No picture or
sound.
No picture.
Remote control
does not function
properly.
CAUSE
Power cord is not
properly connected.
A/V input cables not
properly connected.
A/V input source is not
operating properly.
A/V signal not present.
Contrast and/or
brightness is set
improperly.
TV reception is poor
(applies to system with TV
tuner only)
Batteries are dead.
Remote is not being used
in direct line-of-sight with
the player or remote IR
sensor. Transmission is
best within 6 feet/30º
angle of IR sensor on
monitor front panel, and
within .
REMEDY
Check that power connections
are properly made and all fuses
are in functioning condition.
Check all cables.
Replace or repair A/V source
(DVD player, video game, etc.)
Check all cables. If necessary,
repair or replace A/V source.
Adjust contrast and brightness
levels to see if picture appears.
Check and adjust antenna
system. Move to another area
with better reception, if
possible.
Replace batteries.
Be sure when being used, the
remote is being pointed directly
toward the player or remote IR
sensor (if installed).
BV6VIS User's Manual - page 11
Advertisement
Table of Contents
