Table of Contents
Advertisement
Operations
Deleting the timer
Touch the
button on the control panel, and then tap Timer.
1.
2.
On the Timer screen, tap
.
3.
Tap Delete on the right side of the timer you want to delete.
4.
Tap Done.
Using the timer
1.
Touch the
button on the control panel, and then tap Timer.
2.
Tap START on the right side of the timer you want to use.
NOTE
When the time has elapsed to a set point, a message of "Time is up." appears with
a melody. Tap OK to dismiss the message.
26 English
NQ8300T_NQ50T9539BD_EU_DG68-01190E-00_EN.indd 26
Cleaning
Steam Clean
This is useful for cleaning light soiling with steam.
This automatic function saves you time by removing the need for regular manual
cleaning.
Touch the
button on the control panel, and then tap Cleaning.
1.
2.
Tap Steam Clean.
3.
Follow the instruction on the screen, and then tap Next.
4.
Tap START.
WARNING
Do not open the door before the cycle is complete. The water inside the oven is
very hot, and it can cause a burn.
NOTE
•
If the oven is heavily soiled with grease, for example, after roasting or grilling,
it is recommended to remove stubborn soil manually using a cleaning agent
before activating Steam cleaning.
•
Leave the oven door ajar when the cycle is complete. This is to allow the
interior enamel surface to dry thoroughly.
•
While the oven is hot inside, auto cleaning is not activated. Wait until the oven
cools down, and try again.
•
Do not pour water onto the bottom by force. Do it gently. Otherwise, the water
overflows to the front.
Deodorisation
This is useful for deodorizing the oven. Use this function regularly to remove any
unpleasant odor in your oven.
1.
Touch the
button on the control panel, and then tap Cleaning.
2.
Tap Deodorisation.
3.
Set the time.
•
You can set up to 15 minutes.
4.
Tap START.
2020-01-30
8:57:13
Advertisement
Table of Contents
