nedis HPRF320BK Quick Start Manual

a
Quick start guide
Wireless RF headphones
For more information see the extended manual online:
ned.is/hprf320bk
Parts list [Image A + B]
1 Transmitter
2 Headphones
3 Charging contacts
4 Power switch
5 Micro USB port
6 Volume wheel
7 Pair button
Connecting the transmitter
1. Plug the provided audio cable p into the audio source.
2. Plug the other side of the audio cable into the audio port w on the back of the
transmitter.
3. Plug the provided DC-5.9V power cable o into the power supply port e of the
transmitter.
4. Plug the other side of the DC-5.9V power cable into a power socket.
Switching on the transmitter
• Switch on the transmitter by sliding the power switch u to the ON position.
The LED status indicator t on the transmitter starts to slowly blink red.
Charging the headphones
• Place the headphones with the charging contacts 3 onto the charging pins r of the
transmitter.
The charging indicator LED i on the headphones lights up red to indicate the headphones
are charging.
The charging indicator LED i on the headphones turns off when the headphones are fully
charged.
Switching on the headphones
• Switch on the headphones by sliding the power switch 4 to the ON position.
The LED status indicator q on the headphones starts to slowly blink blue.
Pairing the headphones to the transmitter
1. Press and hold the Pair button 7 on the headphones for 5 seconds.
The LED status indicator q on the headphones starts to blink faster.
2. Press and hold the Pair button y on the transmitter for 5 seconds.
The LED status indicator t on the transmitter starts to blink faster.
When pairing is complete, both LED status indicators will stay lit.
4
Controlling the volume
• Rotate the volume wheel 6 on the headphones to increase or decrease the volume of
the headphones.
Channel balance
• Rotate the channel balance wheel 9 on the headphones to focus the audio of the
headphones to the left or right driver.
Wired connection
When the batteries of the headphones are drained, you can still listen to your audio source
by connecting the headphones directly to the audio source, using the 2x3.5mm audio cable
p .
With a wired connection, you can use the headphones without the transmitter. This way,
4
you can also use the headphones on the go.
Specifications
Headphone Type
Article number
Frequency Range
Wireless Transmission effective distance
Maximum Playback Time
Maximum Standby Time
Maximum Charging time
Frequency Response
Maximum transmission power
Battery capacity
Transmission Power Supply
Maximum Antenna gain
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product HPRF320BK from our brand Nedis
produced in China, has been tested according to all relevant CE standards and regulations
and that all tests have been passed successfully. This includes, but is not limited to the RED
2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable) can be
found and downloaded via webshop.nedis.com/HPRF320BK#support
For additional information regarding the compliance, contact the customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Phone: +31 (0)73-5991055 (during office hours)
Nedis B.V., de Tweeling 28
5215 MC 's-Hertogenbosch, the Netherlands
d
Verkorte handleiding
Draadloze RF koptelefoon
Zie voor meer informatie de uitgebreide handleiding online:
ned.is/hprf320bk
Onderdelenlijst [Afbeelding A + B]
1 Zender
2 Koptelefoon
3 Oplaadcontacten
4 Aan-/ uitschakelaar
5 Micro USB-poort
6 Volumewiel
7 Koppeling knop
De zender aansluiten
1. Steek de meegeleverde audiokabel p in de audiobron.
2. Plug de andere kant van de audiokabel in de audiopoort w op de achterkant van de
zender.
3. Plug de meegeleverde DC-5,9V stroomkabel o in de voeding poort e van de zender.
4. Plug de andere kant van de DC-5,9V stroomkabel in een stopcontact.
De zender aanzetten
• Schakel de zender in door de aan-/ uitschakelaar u naar de AAN positie te schuiven.
De LED status indicator t op de zender begint langzaam rood te knipperen.
De koptelefoon opladen
• Plaats de koptelefoon met de oplaadcontacten 3 op de oplaadpinnen r van de zender.
De oplaad indicatie LED i op de koptelefoon brandt rood om aan te geven dat de
koptelefoon wordt opgeladen.
De oplaadindicator LED i op de koptelefoon gaat uit wanneer de koptelefoon volledig is
opgeladen.
8 Audio port (3.5mm)
9 Channel balance wheel
q Status indicator LED
w Audio port (3.5mm)
e Power supply port
r Charging pins
t Status indicator LED
Over-Ear headphones
HPRF320BK
2.402 - 2.483 Hz
80 m
Up to 22 hours
Up to 24 hours
Up to 3.5 hours
20 Hz - 20 KHz
10 dBm
800 mAh
5.9 VDC - 800 mA
0 dBi
8 Audio-poort (3,5mm)
9 Kanaalbalanswiel
q Statusindicatie LED
w Audio-poort (3,5mm)
e Voedingspoort
r Oplaadpennen
t Statusindicatie LED
HPRF320BK
y Pair button
u Power switch
i Charging indicator LED
o DC-5.9V power cable
p 2 x 3.5 mm audio cable
a USB cable
HPRF320BK
y Koppeling knop
u Aan-/ uitschakelaar
i Oplaadindicatie LED
o DC-5,9V voedingskabel
p 2 x 3,5 mm audiokabel
a USB-kabel
,
®