Setting The Clock Time; Using The Sleep Mode; Setting And Using Alarms - Bose Wave PC system Owner's Manual

Interactive system
Hide thumbs Also See for Wave PC system:
Table of Contents

Advertisement

Setting the clock time

Using the sleep mode

Setting and using alarms

PDF259774_00
Normally, the Wave/PC
software keeps the radio clock synchronized with the clock in your
computer. If you choose to disable this option in the General setup menu, you can set the
clock using the Wave/PC unit's control panel. Press and hold the Clock Set button and use
the Tuning up and down buttons to change the clock time.
To go to sleep listening to music, press the Sleep/Snooze button on the control panel to set
the automatic shutoff time. The display shows the last setting in minutes. Press again, or
press and hold to set the time until shutoff to 75, 60, 45, 30, 15, 10, 5, or 0.
You can use the Sleep mode for any music source.
There are two alarms indicated on the clock display as ALARM (primary) and ALARM 2 (sec-
ondary). You can set the wakeup time for either alarm with the Wave/PC unit on or off. The
indicator for the selected alarm flashes when setting time or mode. The ALARM 2 indicator
continues flashing for 10 seconds after setting ALARM 2.
Selecting which alarm to set
Press and hold Alarm Set. Press Alarm Mode to select ALARM or ALARM 2. The indicator
flashes for the alarm you are setting.
Setting the alarm time
Press and hold Alarm Set and press Tuning up or down. The time display changes slowly at
first, then more quickly. Release Tuning to stop.
Setting the alarm mode
After selecting the alarm, release Alarm Set and press Alarm Mode to select one of the fol-
lowing alarm modes:
• For tone only, press until you see the
• For music only, press until you see the
• For tone and music, press until you see both indicators
Canceling the alarm mode
Follow the directions for setting the alarm mode. Press Alarm Mode until the display shows
no alarm mode indicators.
Checking the alarm setting
Press and hold Alarm Set to see the ALARM wakeup time and the preset station. While hold-
ing Alarm Set, press Alarm Mode to see the ALARM 2 wakeup time and the preset station.
April 12, 2001
Using the Wave/PC
indicator.
indicator.
.
Unit Controls
49

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wave pcinteractiveWave/pc

Table of Contents