Table of Contents
Advertisement
Installing the Wave/PC
The Wave/PC™ system USB adapter cable includes a connector for the
USB port of your computer and a mini-stereo plug for your sound card
output (Figure 2). Connecting both cords to your computer is standard.
However, you have the option of receiving digital audio and bypassing
your computer's sound card. Be sure to read the "Audio Settings" on
page 9.
Figure 2
Sound card output
USB adapter
connections
1. If your Wave/PC™ system was previously installed, remove the orig-
2. Plug the DIN connector of the USB adapter into the DIN socket on
3. Plug the mini-stereo plug into the audio output of your computer's
4. Plug the USB connector into your computer's USB port.This action
TM
system USB adapter cable
Computer
inal Wave/PC™ system cable connecting the Wave/PC™ unit to
your computer.
the rear of the Wave/PC™ unit.
sound card.
launches the Windows "Add New Hardware Wizard." Completing
this installation from this point depends on what operating system
your computer is using:
For Windows 98SE systems , see "Adding new hardware to Win-
dows 98SE systems" on page 6.
For Windows ME systems , see "Adding new hardware to Windows
ME systems" on page 8.
For Windows 2000 systems , see "Adding new hardware to Win-
dows 2000 systems" on page 8.
Installation Procedure
USB port
Wave/PC
TM
unit
DIN socket
5
Advertisement
Table of Contents
