Brother MFC-9660 Owner's Manual page 135

ERROR MESSAGE
COVER OPEN
DISCONNECTED
MACHINE ERROR XX Machine has a mechanical problem. Unplug the machine.
NO RESPONSE/BUSY The number you called does not
NOT ASSIGNED
OUT OF MEMORY
(May occur when the
machine is used as a
printer.)
OUT OF MEMORY
(When the machine is
used as a copier.)
126
Chapter 18
CAUSE
The front cover was not completely
closed.
The other party or other party's fax
machine terminated the call.
answer or is busy. Or, you may have
reached a number that is not
connected to a fax machine.
You tried to access a One Touch or
Speed Dial number that is not
programmed.
The machine memory capacity has
been exceeded.
The machine memory capacity has
been exceeded.
ACTION
Open, then close the front cover.
Try to re-transmit or call the other
party to see what happened.
Then contact your Brother dealer
for service.
Check the number and try again.
Set up the One Touch or Speed
Dial number. (See Storing One
Touch Dial Numbers, page 19 and
Storing Speed Dial Numbers, page
19.)
- Press Reset to delete data
remaining in the memory of
the machine.
- If you have installed the
®
Windows driver, try again
after setting the True Type
mode to "Print as Graphics" in
the PRINT menu of your
application software.
- Reduce the print resolution or
reduce the complexity of your
document.
- Expand the printer memory
with the optional memory
board.
See Out of Memory Message, page
53.