JVC KD-SH9750 Instructions Manual page 48

• When the current disc is an MP3 disc:
1
2
5
1 Disc number
2 Disc type—MP3
3 Album title/performer (or folder name
is set to "Off"—see page 41, or when no Tag is
recorded)
4 Track title (or track name
"Off"—see page 41, or when no Tag is recorded)
5 Current folder number
6 Current track number
7 Elapsed playing time of the current track
To change the display pattern
By pressing DISP (D), you can change the
information shown on the display.
Each time you press the button, the
D
display patterns change.
• For details, see page 24.
DISP
If you change the source or turn off the unit
Disc play also stops.
Next time you select "CD-CH" as the source, disc
play starts from where it has been stopped
previously.
48
4
3
6
7
when "Tag"
when "Tag" is set to
To go to a particular disc directly
Press the number button corresponding to the
disc number to start its playback (while the CD
changer is playing).
1 2 3
• To select a disc number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
• To select a disc number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than 1
second.
To fast-forward or reverse the track
Press and hold ¢
playing a disc, to fast-forward
the track.
Press and hold
playing a disc, to reverse the
track.
Note:
During this operation on an MP3 disc, you can only
hear intermittent sounds. (The elapsed playing time
also changes intermittently on the display.)
To go to the next track or the previous
tracks
Press ¢
playing a disc, to go ahead to
the beginning of the next track.
Each time you press the button
consecutively, the beginning of
the next tracks is located and
played back.
4 briefly, while playing a disc, to go
Press
back to the beginning of the current track. Each
time you press the button consecutively, the
beginning of the previous tracks is located and
played back.
4 5 6
, while
4, while
briefly, while