Changing The Display Pattern - JVC KD-SH9750 Instructions Manual

Selecting a preset station using the
preset station list
If you forget what stations are stored in what
preset numbers, you can check the preset station
list, then select your desired station on the list.
1
Select the band (FM1 – 3, AM).
1 Press SRC (source)
SRC
2 Press and hold SRC for more
3 Within about 5 seconds, press
AM FM1
FM3 FM2
2
Press and hold 5 (up) or ∞ (down) until
the preset station list for the current
band (FM1, FM2, FM3, or AM) appears
on the display.
The currently received station will
be highlighted on the display.
Notes:
• If one of FM band preset station lists (FM1,
FM2, or FM3) is shown on the display, you can
show the other lists by pressing 5 (up) or
∞ (down).
• If a name has been assigned to a station (see
page 44), it will be shown instead of the station
frequency.
3
Select the number (1 – 6) for the preset
station you want.
1 2
14
repeatedly to select the tuner.
than 1 second.
SRC again.
Each time you press the
button, the band changes.
3 4 5

Changing the display pattern

By pressing DISP (D), you can change the
information shown on the display.
Each time you press the button, the
D
display patterns change as follows:
DISP
• Initial display pattern:
• Assigned station name is emphasized:
1
*
If a name has been assigned to a station, it will be
shown instead of "No Name."
* 2
Appears only when selecting a preset station.
If the sound quality decreases and the
stereo effect is lost while listening to an
FM station
In some areas, adjacent stations may
interfere with each other. If this interference
occurs, this unit can automatically reduce this
interference noise (initial factory setting).
However, in this case, the sound quality will
be degraded and the stereo effect will be also
lost.
If you do not want to degrade the sound
quality and to lose the stereo effect, rather
than to eliminate the interference noise, see
"To change the FM tuner selectivity—IF
Filter" on page 42.
6
When using this unit in an area other than
North or South America
You need to change the AM/FM channel
intervals. See "To change the AM/FM channel
intervals—Area" on page 42.
1
* 2
*