Regulatory And Safety Information; Safety Conventions; Responsibility Of The Manufacturer - GE CAM-14 Service Manual

Introduction

Regulatory and Safety Information

This section provides information about the safe use and regulatory compliance of
this device. Familiarize yourself with this information and read and understand all
instructions before attempting to service this device.
NOTE:
Disregarding the safety information provided is considered abnormal use of
this device and could result in injury, loss of data, and void any existing product
warranties.

Safety Conventions

A Hazard is a source of potential injury to a person, property, or the product.
This manual uses the terms DANGER, WARNING, and CAUTION to point out hazards
and to designate a degree or level of seriousness. Familiarize yourself with the
following definitions and their significance.
Definitions of Safety Conventions
Safety
Convention
DANGER
WARNING
CAUTION

Responsibility of the Manufacturer

GE Healthcare is responsible for the effects of safety, reliability, and performance on
GE-supplied hardware only if the following conditions are met:
• Assembly operations, extensions, readjustments, modifications, or repairs are
carried out by persons authorized by GE Healthcare.
• The electrical installation of the relevant room complies with the requirements of
the appropriate local, state, and other government regulations.
• The equipment is used in accordance with the instructions for use.
8
Definition
Indicates an imminent hazard, which, if not avoided, will result in death
or serious injury.
Indicates a potential hazard or unsafe practice, which, if not avoided,
could result in death or serious injury.
Indicates a potential hazard or unsafe practice, which, if not avoided,
could result in minor personal injury or product/property damage.
CAM-14 /CAM-HD
® ®
2049751-001C