Cable Assemblies; Power Interface Unit Parts; Hdos Assembly Parts - Lucent Technologies SLC-2000 Remote Terminal Assembly Manual

363-208-010
Parts Description

Power Interface Unit Parts

The Power Interface Unit is provided by the manufacturer with the following cable
assembly and hardware. The following listing can be used as an ordering guide or
as an installation checklist for material previously ordered. The cable assembly is
shipped with the unit.
ED7C734-30 Group 1 Power Interface Unit
equipped with
ED7C723-34 Group 2
NOTE
The following cable assembly is required in addition to the above for the
FITL option:
ED7C723-34 Group 5

HDOS Assembly Parts

The HDOS assembly is provided by the manufacturer with the following hardware.
The following listing can be used as an ordering guide or as an installation
checklist for material previously ordered. The material that is indicated as optional
is required for specific purposes. All pieces are shipped with the shelf, but some
parts (*) may be loosely attached or shipped in separate containers.
J1C265AC-1 List 4 HDOS Assembly
equipped with
(4) 840060164*
(2) 402444491*
(1) 846240133*
(10) 406432989*

Cable Assemblies

The major cable assemblies furnished as dangler cables on the ARM and MDS
are attached to those shelves by the manufacturer. The following cable
assemblies interface with the customer's cables. Because they are not depicted in
the CABLING, WIRING AND ASSEMBLY chapter of this manual they are detailed
here for installation trouble shooting purposes.
5-4
Issue 5 May 1997
Cable Assembly
:
Fan and HDOS Power Extender Cable Assembly
Screws, pan head machine
Studs, slotted
Cover, fiber
Fuses, 1.0 amp