E&M Channel Number Identification - Lucent Technologies SLC-2000 Remote Terminal Assembly Manual

363-208-010
Cabling, Wiring, and Assembly
Table 3-6. E&M Connections
Left Cable Duct
J106 to P106
J206 to P206
Step 2: Terminate the E&M pairs at the MDF and label the cables, connectors,
and the conductors in accordance with the figures for J105, J106, J205,
and J206 connectors. Note the wire color coding sequence of the factory
prepared cable assemblies to facilitate the terminations.
Table 3-7. E&M Channel Number Identification
Left Cable Duct
J106
J206
Step 3: Orient the mating cable connectors so that the customer cables exit
upwards towards the cable racks. Refer to Figure 3-41.
Right Cable Duct
J105 to P105
J205 to P205
:
NOTE
Stamp each connector (J105, J106, J205, J206) before mating
to its associated connector.
Figure
3-43
3-45
Right Cable Duct
J105
J205
Issue 5 May 1997
Figure
3-42
3-44
3-71