Sony DVP-F5 Operating Instructions Manual page 56

Changing the Sound (continued)
The display examples are as follows:
• PCM (stereo)
• Dolby Surround
• Dolby Digital 5.1ch
"LFE" appears only when a disc
contains an LFE signal component.
"LFE" remains on the "PROGRAM
FORMAT" display even if the LFE
signal component is not being output.
• DTS
"LFE" is always enclosed in a solid
line regardless of the LFE signal
component being output.
Note
When the signal does not contain rear signal components such as LS, RS or S, the
Virtual Enhanced Surround (VES) effect cannot be heard (page 60).
56
Using Various Functions with the Control Menu
1: ENGLISH
PROGRAM FORMAT
PCM 48kHz 24bit
AUDIO
Select:
ENTER
1: ENGLISH
PROGRAM FORMAT
DOLBY DIGITAL 2/0
DOLBY SURROUND
AUDIO
Select:
ENTER
1: ENGLISH
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
L
LS
AUDIO
Select:
ENTER
1: ENGLISH
PROGRAM FORMAT
DTS 3/2.1
L
LS
AUDIO
Select:
ENTER
L C R
S
C R
LFE
RS
C R
LFE
RS