Sony DVP-F5 Operating Instructions Manual page 24

5.1 Channel Surround Hookups (continued)
Setups for the player
Some setup adjustments ar e necessar y for the player depending on the
components to be connected.
Use the setup display to change the various settings.
For details on using the setup display , see page 76.
• When you connect an audio component with a built-in DOLBY
DIGIT AL decoder A
Select "DOLBY DIGIT AL" under "DIGIT AL OUT" in the "AUDIO
SETUP" display and set "DOLBY DIGIT AL" to "DOLBY DIGIT A L."
(page 93)
• When you connect an audio component with a built-in DTS decoder B
Select "DTS" under "DIGITAL OUT" in the "AUDIO SETUP" display and
set "DTS" to "ON." (page 93)
To set, press
To quit, press
Notes
• When you do not connect an audio component with a built-in DOLBY
decoder , do not set "DOLBY DIGIT AL" to "DOLBY DIGIT AL."
• When you do not connect an audio component with a built-in DTS decoder
not set "DTS" to "ON."
24
Getting Started
AUDIO SETUP
AUDIO DRC: STANDARD
DOWNMIX: DOLBY SURROUND
DIGITAL OUT
DOLBY DIGITAL: DOLBY DIGITAL
DTS:
, then
ENTER
.
DISPLAY
A
ON
B
.
DIGIT AL
, do