Preparation; Installing The Software; Installing M-Crew For Har-D1000 - Sony HAR-D1000 M-Crew Operating Instructions Manual

Preparation

Installing the software

Use this procedure to install a software onto your computer's hard disk.
Be sure to start up Windows in advance.
Notes
• Be sure to install this software before connecting the HAR-D1000 to your
• Be sure to log on through the administrator's account to install a software.

Installing M-crew for HAR-D1000

1
2
3
6
computer. If not, this software may not function properly.
(for Windows2000)
Load the supplied "M-crew for HAR-D1000" CD-ROM into the
CD-ROM drive of your computer.
Double-click the
The setup window appears.
Click "Setting up M-crew" in the setup window.
The setup program starts up.
Note
The Windows Installer is necessary to install M-crew for HAR-D1000. If the
Windows Installer is not installed in your computer, the following window
appears. If this happens, click "Restart" to restart your computer. When
you restart your computer, do not remove the CD-ROM. After restarting
the computer, the setup window may become hidden under other
windows.
(InstallDlg.exe) icon.