Connections - Sony HAR-D1000 M-Crew Operating Instructions Manual

Connections

Connecting your personal computer with the HAR-D1000
Use a USB cable to connect your personal computer with the HAR-D1000.
HAR-D1000
Notes
• Be sure to install this software before connecting the HAR-D1000 to your
• Be sure to log on through the administrator's account to install a software.
• Make sure each plug is straight when you insert it. Inserting it at an angle
• Connect the USB connector directly to the computer's USB port with a USB
• In case of Windows2000/WindowsMe, if you turn off the HAR-D1000 with a
• Some HAR-D1000 functions are not supported by M-crew for HAR-D1000
• A single HAR-D1000 should be operated by a single computer loaded with
10
To the USB connector
USB cable
With the plug
correctly oriented,
insert it fully into the
connector.
computer. If not, this software may not function properly.
(for Windows2000)
may damage the connector parts.
cable. If you connect the two units via a USB hub, the computer may not be
able to control the connected HAR-D1000.
USB cable connected, a warning message may appear in the display.
(e.g., Synchro-Recording from a CD changer, etc.). If Synchro-Recording from
a CD changer is started on the HAR-D1000 while "M-crew for HAR-D1000"
software is starting up, the software is automatically ended.
the "M-crew for HAR-D1000" software.
If you use the same HAR-D1000 with no more than one computer in which
the software has been installed, HAR-D1000 data may not be properly read in.
If this occurs, click the Reload button (refer to the Help).
Computer
To the
computer's
USB port
?
Make sure to connect the
HAR-D1000 directly to your
computer. Do not connect
via a USB hub.