Setting The Lcd Contrast - Brother MFC-680W Quick Setup Manual

STEP 1
Setting Up the Machine
3
The LCD shows:
If all lines are clear and visible, press
1 (Yes) on the dial pad to finish the quality
check.
If you can see missing short lines, press
2 (No) on the dial pad and go to step 4.
OK
4
The LCD asks you if the print quality is OK for
black and colour. Press 1 (Yes) or 2 (No) on
the dial pad.
After pressing 1 (Yes) or 2 (No) for both black
and colour, the LCD shows:
5
Press 1 (Yes), the machine will then start
cleaning the colours.
6
After cleaning is finished, press Colour Start.
The machine starts printing the Print Quality
Check Sheet again and goes back to step 2.
10
Is Quality OK?
Yes Press
No Press
Poor
Black OK?
Yes Press
No Press
Color OK?
Yes Press
No Press
Start Cleaning?
Yes Press
No Press
7

Setting the LCD contrast

You can adjust the LCD contrast for a sharper and
more vivid display. If you are having difficulty reading
the LCD, try changing the contrast setting.
1
Press Menu.
2
Press a or b to choose General Setup.
Press OK.
3
Press a or b to choose LCD Settings.
Press OK.
4
Press a or b to choose LCD Contrast.
5
Press or to choose Light, Med or
Dark. Press OK.
6
Press Stop/Exit.
Note
You can also adjust the angle of the LCD display
by lifting it.