Bearing Plate; Lifting The Machine - ABB AMA Manual

2.1.2 Bearing plate

2.2 Lifting the machine

3BFP 000 063 R0101 REV D
A stainless steel bearing plate is attached to the machine frame. For the location of the bearing
plate, see Appendix Typical position of plates.
The bearing plate indicates the type of the bearings and lubrication to be used, see Figure 2-2
Bearing plate for grease lubricated rolling bearing.
Figure 2-2 Bearing plate for grease lubricated rolling bearing
1. Bearing type of D-end
2. Bearing type of ND-end
3. Lubrication interval
4. Quantity of grease for D-end bearing
5. Quantity of grease for ND-end bearing
6. Type of grease delivered from factory
Before the machine is lifted, ensure that suitable lifting equipment is available and that the
personnel is familiar with lifting work. The weight of the machine is shown on the rating plate,
dimension drawing and packing list.
NOTE: Use only the lifting lugs or eyes intended for lifting the complete machine. Do not use
any small additional lifting lugs or eyes available, as they are there only for service
purposes.
NOTE: The center of gravity of machines with the same frame may vary due to different
outputs, mounting arrangements and auxiliary equipment.
Manual for High Voltage Process Performance Motors
Transport and Unpacking - 7