Printing From An External Device - Sony DPP-FP70 Operating Instructions Manual

Printing from an
external device
You can connect a mass-storage-complaint
digital camera, a USB memory, a photo
storage device, or other external device
and print an image directly from the
external device.
Notes
• We cannot guarantee connection with all
types of mass storage devices.
• If a memory card is inserted in the printer, the
printer cannot read the signal from an
external device connected to the PictBridge/
EXT INTERFACE connector of the printer.
Remove the memory card, if any.
1
Set your digital camera or other
external device ready for printing
with the Mass Storage-compliant
printer.
The settings and operations that are
necessary before connection differ
depending on the external device you
use. For details, see the operating
instructions of the external device. (In
case of Sony Cyber-shot digital
camera, for example, select "Normal"
mode or "Mass Storage" mode for the
"USB Connect". )
2
Connect the printer to the AC
power source (. Read This
First).
3
Press 1 (on/standby) switch to
turn on the printer.
The 1 (on/standby) indicator of the
printer lights in yellow green.
4
Connect a camera or an external
device to the PictBridge/EXT
INTERFACE connector of the printer.
38 GB
Use the USB cable supplied with the
digital camera or other external
device, if necessary.
Printing in the direct mode is
possible.
To PictBridge/EXT INTERFACE
connector
To USB
connector
Notes
• If you use a commercially available USB
cable, please use the one shorter than 3m in
length.
• While the access indicator of the external
device is flashing, never turn off the power of
the printer or an external device nor remove
the USB cable. The data inside the external
device may be damaged. We cannot
guarantee any damages that may be caused
by data loss or damage.
• You cannot use a USB hub or a USB device
equipped with a USB hub.
• Encoded or compressed date by fingerprint
authentication or password cannot be used.
• The following Sony USB devices cannot be
used since they contain fingerprint
authentication system or a USB hub:
USM16A/S, USM32A/S, USM64A/S,
USM128A/S,USM256A/S, USM128B/BMS,
USM64C, USM128C, USM128F
Mass-storage-compliant
USB memory, digital
camera, photo storage
device, or other external
device.