Editing An Image; Displaying The Edit Menu - Sony DPP-FP70 Operating Instructions Manual

3
Press f/F to select "Index Print",
"DPOF Print", or "Print All" and
then press ENTER.
The confirmation dialog box is
displayed.
Note
If there are no DPOF preset images when
you selected "DPOF Print," an error
message will be displayed.
4
Press g/G to select "Yes" to start
printing or "No" to cancel
printing, and then press ENTER.
When you select "Yes," printing
starts. During printing, the PRINT
indicator flashes and the printing
process is displayed.
To stop printing
Press CANCEL. When you are
printing multiple copies, the next
printing after the one currently
printing will be canceled.
When printing is completed, the print
paper automatically emerges on the
paper tray.
5
Remove the print paper from the
paper tray.
Tips
• Even if the remaining volume of the ink
ribbon is shorter than the print quantity, you
can proceed with printing. If the ink ribbon
runs out in the middle of printing and a
message appears, follow the displayed
instructions to replace the ink ribbon (see
"Read This First").
• When the "Date Print" item of the Print setup
menu is set to "On", the date the image was
shot or saved is printed (page 32).
12 GB

Editing an image

Displaying the Edit menu

You can display the Edit menu and edit or
add an effect to an image. You can print or
save an image being previewed.
Buttons to be used in the Edit menu
1
Display the image that you want
to edit.
Display the image in the image
preview window or move the Cursor
to the desired image in the image list.
2
Press MENU on the printer.
The menu bar is displayed.
Edit menu icon
To exit the menu mode
Press MENU again. The previous
window is displayed.
3
Press g/G to select
then press ENTER.
The Edit menu is displayed.
g/G/f/F/ENTER
PRINT
CANCEL
MENU
Menu bar
(Edit) and