Table of Contents
Advertisement
3
When the BLUETREK® METAL is switched off, press and
hold the TALK button for about 7 seconds until the indicator
light flashes red and blue alternately. And a sound can be
heard in the speaker.
4
Once the mobile phone detects the headset, a "BLUETREK METAL" message will be dis-
played. Follow the phone instructions to accept the pairing. The PIN code (or passkey) is 0000,
then press "yes" or "ok" .
5
For some phones, you may need to select "Connect" .
BLUETREK METAL
If you haven't started the discovery mode within 5 minutes, the headset will go to the standby
mode. You must then switch off your headset and start the pairing again.
If pairing was successful, the indicator light will switch to blue and flashes slowly.
The headset will connect automatically to the mobile phone.
5 I BLUETREK METAL
BLUETREK METAL
"0000"
"Talk" button
BLUETREK METAL
Connect
Assign short name
Set as unauthorised
Delete
Select
Cancel
Advertisement
Table of Contents
