Setting Maximum Time For Incoming Messages; Setting Toll Saver; Icm Recording Monitor - Brother IntelliFAX 1575MC Owner's Manual

Setting Maximum Time for Incoming Messages

Your fax machine comes set to receive voice messages up to 30 seconds long. You can
change this setting to any length from 20 seconds to 60 seconds, in 5-second
increments.
1
Press Menu/Set, 8, 4.
2
or
Press to select the maximum time setting
for incoming messages, and then press
Menu/Set.
3
Press Stop/Exit.

Setting Toll Saver

When you set the toll saver feature, the fax machine answers after four rings if you
don't have messages, and after two rings if you do have messages. This way, when
you call the fax machine and let it ring three times, you know you have no messages,
and can hang up, to avoid a toll charge.
When Toll Saver is ON, it overrides your Ring Delay setting. Toll Saver must be off
for the fax machine to operate using your Ring Delay setting.
(See Setting Ring Delay, page 5-3.)
1
Press Menu/Set, 2, 1.
2
or
Press to select the TOLL SAVER
(or RING DELAY), and then press Menu/Set.
3
or
to select ON, and then press Menu/Set.
Press
4
Press Stop/Exit.

ICM Recording Monitor

This feature lets you turn the speaker volume for voice messages ON or OFF. When
you turn the monitor OFF, you will not hear messages as they come in.
1
Press Menu/Set, 8, 5.
2
or
Use to select OFF (or ON), and then press
Menu/Set.
3
Press Stop/Exit.
M E S S A G E C E N T E R
9 - 6