Blueant InterPhone Faq page 9

Troubleshooting
1. How do I re-connect my Interphone to my mobile?
Switch the Interphone on by pressing the MFB on the main unit. If your phone doesn't auto
connect with the Interphone, press the MFB again to reconnect to your phone. If pressing
the MFB button starts voice dialling on your phone, simply press the MFB again to cancel
voice dialling.
2. How do I re-connect my Interphones back to intercom mode?
Switch both the Interphones on by pressing the MFB on the main unit.
nd
On one of the units, press and hold the MFB for 3 seconds until you hear the 2 beep, after
a second both units will go back into intercom mode and the LED's will flash blue rapidly.
3. Why doesn't the intercom work when I turn my Interphone back on?
When the interphone is switched back on, it will attempt to reconnect back to your mobile as
default. To switch back to intercom mode simply, press and hold the MFB on one of the
nd
Interphones for 3 seconds until you hear the 2 beep.
4. How can I tell when I am receiving a call while in intercom mode?
While in intercom mode, the phones ring tone will not be transferred to the Interphone. It is
best to have the vibrate function of your phone turned on and your phone positioned
somewhere that you will be able to feel when a call is received.
5. Why won't my Interphone go into pairing mode?
Follow the instructions in the Interphone Manual. From off, press and hold the MFB until the
LED's start flashing red and blue.
The Interphone sometimes requires a few seconds to establish a connection.
Please be patient while devices are searching.
6. Is my Interphone charged?
When the battery is low the blue flashing LED will be replaced with a red flashing LED
7. Why can't I hear any sound from the Speaker?
Check to make sure that both the Interphone and phone volume are not set too low.
Ensure the Speaker/microphone unit has been plugged back in securely
8. Why does my Interphone sound noisy and distorted?
Turn your mobile phone and interphone volume down to a level that does not give echo or
feedback. A low battery can also cause bad voice quality. If low battery is indicated, please
8