Compaq 1024 Installation Manual page 17

Other Countries
1. The cord set fittings must bear the certification mark of the
agency responsible for evaluation in a specific country.
Acceptable agencies include:
BSI (United Kingdom)
CEBEC (Belgium)
DEMKO (Denmark)
EANSW (Australia)
SETI (Finland)
IMQ (Italy)
KEMA (The Netherlands)
2. The flexible cord must be of a HAR (harmonized) type
H05VV-F 3-conductor cord with a minimum conductor
size of .03 square inches (1.0 square millimeter).
3. The cord set must have a current capacity of at least
amperes and a nominal voltage rating of 125 or 250 VAC.
For more information about power cord set requirements,
contact your Authorized COMPAQ Reseller.
Appendix
NAMKO (Norway)
OVE (Austria)
SEMKO (Sweden)
SEV (Switzerland)
UTE (France)
VDE (Germany)
A-5