Installing The Display Assembly - Dell Latitude 5424 Rugged Service Manual

6.
CAUTION: The following epoxy screw locations will require additional focus. These screws are difficult
to remove and there may be damage during the removal process. To prevent damage to the screws and
surrounding plastics, please use the correct screwdriver for each screw type.
Loosen the four epoxy screws on hinges [1] and to separate the LCD assembly from the computer [2].

Installing the Display Assembly

1. Tighten the two epoxy screws on left [1] and on the right [2] side and .
2. Close the lid [3].
120 Removing and installing components