Installing The Lcd With Bezel And The Display Back Cover Assembly - Dell Latitude 5424 Rugged Service Manual

Installing the LCD with bezel and the display back cover assembly

1. Replace the EDP cable [1] on the LCD connector and close the actuator [2].
2. Secure the connector using a piece of tape [3] and adhere the reflective tape on the display panel [4] .
3. Connect the touch controller cable [5] and use insulation tape on the connector [6].
4. Align and place the bezel on the back cover [1] and secure it using the four M2.5 epoxy screws [2].
124 Removing and installing components